When it comes to kitchen design, the work zone dimensions should be the priority. This includes the refrigerator, sink, and oven. These three should be in a triangle formation, and the ideal distance between them should be no more than 9 feet. This primary triangle is called the priority triangle and helps to keep the flow of work easy and efficient. Kitchen Work Zone Dimensions
The priority triangle consists of three sides and various angles. The most common side lengths of this triangle are 4-8-9 or 5-9-10. This denotes the length of each side. The angles of the triangle also matter, with the corner angles usually ranging from 25-45 degrees. This triangle should be kept within the limits of the work zone for optimal kitchen design.Priority Triangle Dimensions
The standard upper cabinet height is usually 54-60 inches above the countertop. This is based on the eye level of a person, and the ergonomics of the area. If the area is too low, then it can be an issue to store items inside of the cabinet, as it would cause a strain on the back and neck. The majority of wall cabinets are 24” deep, so it’s important to keep this in mind when looking for the perfect upper cabinet height.Standard Upper Cabinet Height
A peninsular kitchen generally has one wall that’s lined with cabinets. This type of kitchen is shaped like a horse shoe and due to its smaller area, it’s important to balance the work zone and storage areas properly. The peninsular kitchen typically requires more floor area for movement and should usually be no less than 8-10 feet long. Try to maximize the room space but still keep it ergonomically comfortable.Peninsular Kitchen Dimensions
Islands in kitchens provide extra space for storage and movement. The minimum suggested size for an island is 4x2, which is 8 square feet. It’s also important to keep the island at least 4 feet away from all walls. This will help to prevent any cluttering of counter space. It’s also important not to make the island too big, as it will become a space-taker rather than a space-utilizer.Island Kitchen Dimension Suggestions
Bar-height counters are generally 40-42 inches in height and should be comfortable to work with. This height is generally used in kitchen areas where the seating area is a lot lower than the counter. Keeping the proper dimensions is important, as it will help balance the ergonomics of the area. Bar-Height Counter Dimensions
Standard kitchen cabinets come in different sizes, usually 24”, 30”, 36”, and 42”. These sizes refer to the width of the cabinet in inches. The depth of these cabinets should be around 18 inches and the length varies based on the dimension purchased. These sizes are ideal for most standard kitchen designs and are used most commonly in homes.Standard Kitchen Cabinet Dimensions
Kitchen wall cabinets are typically 24” in width and 12-18” in length. The depth of the cabinets are also typically 12”. These are the standard sizes when it comes to kitchen wall cabinets. Most of the dimensions for kitchen wall cabinets depend mainly on what type of room space you have. Studies have shown that wall cabinets should not be more than 15” above the kitchen countertop.Kitchen Wall Cabinet Dimensions
Standard kitchen countertop dimensions are typically between 25-60” wide and 25-35 inches in length. It’s important to measure the kitchen area to make sure that the countertop fits properly in the space. If the countertop is too short, it could throw off the balance of the kitchen. Countertops are important to a kitchen design, so dimensions should be taken into account.Kitchen Countertop Dimensions
The standard counter depth is usually 24”. This is the depth of the counter from the front to the back. Standard countertops should not extend more than 28” as this could cause issues when moving around the kitchen. Depending on the size of the kitchen, tinkering with the counter depth may help to create more of a spacious feel.Standard Counter Depth
The primary dimension when it comes to kitchen design is ergonomics. The kitchen should be designed to maximize efficiency and movement. You should also take into account the work zone triangle, upper cabinet heights, peninsular kitchen dimensions, island kitchen dimensions, bar-height counters, and standard cabinet dimensions. The kitchen should be designed in a way that is comfortable and that will allow for the best space utilization. PRIMARY_Kitchen Design Dimension